Mac Field Guide

TroubleshootingFix

Printer stopped working after the macOS 27 update? How to get it printing again

Applies to macOS 27 Golden GateReviewed 17 November 20263 min read

Apple siliconBrotherHPCanon

Short answer

Most printers that stop after the macOS 27 update use an old Intel-only driver that needs Rosetta, and upgrading to macOS 27.0 or 27.0.1 removed Rosetta. The quickest fix is to remove the printer and add it again as AirPrint, which needs no driver. If your printer doesn't support AirPrint, install Rosetta again and reinstall the maker's latest driver.

On this page
  1. Why it happens
  2. Fix 1: add the printer again with AirPrint
  3. Fix 2: install Rosetta again
  4. Fix 3: get the newest driver from the maker
  5. Fix 4: reset the printing system
  6. Scanning stopped working
  7. Other apps that can help
  8. Sources and further reading

Why it happens

Many Brother, HP, Canon and Fujifilm drivers were built for Intel Macs. On a Mac with Apple silicon they run through Rosetta, Apple's translation layer. Upgrading to macOS 27.0 removed Rosetta and didn't put it back, so those drivers stopped loading. Apple fixed that in macOS 27.2: upgrading no longer removes Rosetta. If you upgraded before 27.2, it may still be missing.

Typical signs:

  • Print jobs sit in the queue or fail with a message that the printer software isn't compatible.
  • The printer can't be added, or it's added but nothing prints.
  • Scanning from the printer's maker app fails or keeps asking you to restart, while printing still works.

Intel Macs don't use Rosetta, and macOS 27 doesn't run on Intel Macs anyway. If you have an Intel Mac on Tahoe, this guide isn't about your problem.

Fix 1: add the printer again with AirPrint

Most printers made in the last ten years support AirPrint. It uses Apple's built-in driver, so it doesn't depend on Rosetta and will keep working after Rosetta goes away.

  1. Choose Apple menu › System Settings, then click Printers & Scanners in the sidebar. You may need to scroll down.
  2. Select the printer, then click − (Remove Printer) and confirm.
  3. Click Add Printer, Scanner, or Fax… and select your printer in the list. It can take a minute or two to appear.
  4. If there's a Use menu, choose AirPrint. Then click Add.
  5. Print a test page.

If AirPrint isn't in the Use menu, your printer doesn't support it over that connection. Try Fix 2.

Fix 2: install Rosetta again

If the printer needs the maker's own driver, put Rosetta back. Often the driver asks for it on its own: accept the prompt. If nothing asks, open Terminal (in Applications › Utilities) and run:

softwareupdate --install-rosetta --agree-to-license

Then restart the Mac, remove the printer as in Fix 1, and add it again so macOS uses the maker's driver.

This is a stopgap. Apple says macOS 27 is the last version with full Rosetta support, so Intel-only drivers will stop working again when macOS 28 arrives. Plan to move to AirPrint or a driver made for Apple silicon. See which of your apps and drivers still need Rosetta.

Fix 3: get the newest driver from the maker

  • Brother: search your model on support.brother.com and look at the macOS 27 downloads. Some older models only list AirPrint for new macOS versions.
  • HP: HP recommends AirPrint or the HP Smart app for most models.
  • Canon, Epson, Fujifilm and others: check the maker's support page for macOS 27. Install the new driver, then remove and re-add the printer.

Fix 4: reset the printing system

Apple suggests this as a last step. It deletes every printer, its presets and the list of finished jobs, so you'll add your printers again afterwards.

  1. Open System Settings › Printers & Scanners.
  2. Control-click inside the printers list (or the empty list) and choose Reset Printing System.
  3. Confirm, then add your printer again as in Fix 1.

Scanning stopped working

Scanners use separate drivers, and those are just as often Intel-only. Try scanning from Image Capture (in Applications) or from Printers & Scanners, which use Apple's built-in scanner support when the device offers it. If your scanner only works with the maker's app, reinstalling Rosetta as in Fix 2 is the short-term answer.

Other apps that can help

You don’t need any of these for the steps above. They go further in different ways, so pick what fits how you work.

AppWhat it doesPrice
Brother iPrint&ScanBrother's own print and scan app. Check its macOS 27 support for your model.Free
HP SmartHP's app for setting up, printing and scanningFree
VueScanScanner software with its own drivers for thousands of older scannersPaid, free trial
Silicon InfoShows in the menu bar whether the front app runs natively or through RosettaFree, open source

Sources and further reading

Applies tomacOS 27

Reader tips

    No tips yet. If something else worked for you, or a step looks different on your Mac, add it here.

    Add a tip

    No links or email addresses. Tips are checked before they show. How we handle tips

    Keep reading